Hard Disk Model | MAXTOR 6L100M0 |
Disk Family | DiamondMax 10 |
Form Factor | 3.5" |
Capacity | 100 GB (100 x 1 000 000 000 bytes) |
Rotational Speed | 7200 RPM |
Rotation Time | 8.33 ms |
Average Rotational Latency | 4.17 ms |
Disk Interface | Serial-ATA/150 |
Buffer-Host Max. Rate | 150 MB/seconds |
Buffer Size | 8192 KB |
Average Seek Time | 9 ms |
Width | 101.6 mm (3.98 inch) |
Depth | 147 mm (5.79 inch) |
Height | 26.1 mm (1.02 inch) |
Weight | 630 grams (1.39 pounds) |
Acoustic (Idle) | 3.5 Bel |
Acoustic (Min performance and volume) | 2.7 Bel |
Acoustic (Max performance and volume) | 2.7 Bel |
Required Power For Spinup | 1520 mA |
Power Required (Seek) | 12.2 W |
Power Required (Idle) | 7.3 W |
Power Required (Standby) | 0.9 W |
Manufacturer | Seagate Corporation |
Average temperature | Information not yet available |
Average health | Information not yet available |
S.M.A.R.T. statistics and more information for this type of hard disk will be available soon. If you have this type of hard disk, please select Send test report to developer option from the Report menu. |
Average rating: 5.0 | [ 907 vote(s) ] Rate this hard disk: 1 - Lowest 10 - Highest |
SEAGATE ST250LT015 (250 GB S-ATA II)
WDC WD2503ABYZ (250 GB S-ATA Gen3)
WDC WD2502ABYS (250 GB S-ATA II)
Device manufacturers may change any parameters without prior notice. There is no warranty that the information listed here is complete and accurate. If you encounter any improper value, please let us know.
All trademarks and registered trademarks are the property of their respective owners.